Payment & Shipping Terms:
|Product Name:||RGB LED Flood Light 50W||Input Voltage:||AC90~305V 50/60Hz|
|Materials:||Aluminum+PC||Beam Angle:||25/60/90 Degree|
|Power Efficiency:||>90%||Warranty:||3 Years|
DMX512 Led Rgb Flood Light,
240VAC Outdoor Led Flood Lights
IP66 50W RGB LED Flood light for sports area lighting fixture.
LED is cold light sources, a wide range of output color, RGB modular flood light use LED as a light source ,can be widely used in various building walls of light color decoration, and the stage, meeting rooms, display lights, ancient buildings, the Cultural Plaza and other places.
1) Control mode:RF/IR/DMX512. Standard DMX512 input interface and a built-mode controller , can be realized in whole or segmented light change control, especially, it can achieve water and complicated effects.
2) Adoption LEYOND exclusive Lens with light transmittance up to 98%.
3) Perfect Light Distribution Solution:Adoption of integrated shell optic lens, enhance the brightness and illumination uniformity.
4) There are 25°,,60°, 90° beam angle options for the Lens.
5) Master or Slave function, if set master, it can stead of the external controller.
6) Reliable constant current driver designed to ensure high-power LED lights for a stable job.
7) Superior ability to adapt to the environment, protection grade IP65, can adapt to a variety of indoor and outdoor temperature and humidity environment. The lamp base is aluminum alloy, solid ,anti-aging, anti-variant, long service life.
8) More than 16777 thousand kinds of colors can be realized output, with good light efficiency, beautiful color and so on.
9) Impact Resistance, Shock-proof, Without Ultraviolet (UV) and Infrared (IR) Radiation: No filament and glass frames, avoid break of the traditional lamp,without harm to the human body.
1. Electrical Specifications:
|Model||modules number||Power||Input Voltage||Input Current||Power factor||Power efficiency|
|Emitting Color||λd / CCT||Typical Lumens||Forward Voltage||Forward Current|
|RED||620-630 nm||1800 lm||13-17V||680mA(MAX)|
|GREEN||520-530 nm||2200 lm||21-25V||680mA(MAX)|
|BLUE||460-465 nm||560 lm||21-25V||680mA(MAX)|
|Model||Power||Carton Size||gross weight||Net Weight||IP Rating||Meterial|
1. DMX Control:
2. RF/IR Control:
a) Product should meet the "use environment " requirements.
b) If you asked a group of light has the same effect, the group light should be set to the same address.
c) The largest light control points cannot be more than 510.
d) Connected to a group of light is only one master (operate in master mode lights, controller or the console).
e) Controller or signal splitter to connect the rear end of a light cannot be more than the maximum length of 30 meters.
f) To ensure the reliable transmission of DMX signal, if lamp connection is over 100M ,should be added in the DMX signal transmission line signal amplifier to amplify the signal.
g) The input and output port should meet the requirements, otherwise it will cause light damage.
Contact Person: Ada Zhong